Combustion of solid waste from wood-based ethanol productionReportar como inadecuado

Combustion of solid waste from wood-based ethanol production - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

Luleå University of Technology, Department of Engineering Sciences and Mathematics, Energy Science. 2005 (English)Licentiate thesis, comprehensive summary (Other academic)

Abstract [en] : The solid residue from wood-based ethanol production has a low ash content and high heating value, making it interesting for combustion applications, e.g. small-scale appliances and gas turbines. Combustion and gasification properties have been studied using thermogravimetric analysis (TGA) and differential thermal analysis (DTA). Char combustion rate data obtained could be used in combustion simulations. TGA and DTA data are useful for comparison with other fuels where data are available for similar heating rates. One possible use is direct-firing of gas turbines for Combined Heat and Power (CHP) at the site of the ethanol plant. Another possible use of the material is for the production of fuel pellets. A combustion test with a 150 kW powder burner has been done. Fuel feeding and combustion were stable. The average concentration of CO in the stack gas was 8 mg/MJ, the averag concentration of NOx was 59 mg/MJ and the average total hydrocarbon concentration was below 1 ppm, at an average O2 concentration of 4.6 per cent. Process parameters, investments, costs and revenues for these two production options have been estimated. The conclusion is that CHP is the most profitable use, although the uncertainties in estimated costs are considerable. Reductions of greenhouse gas emissions are decidedly larger for the CHP option. It has been concluded that CHP production is an option worth pursuing further. The technical feasibility of using the material for direct-firing of a gas turbine remains to be established however.

Place, publisher, year, edition, pages: Luleå: Luleå tekniska universitet, 2005. , 19 p.

Series : Licentiate thesis / Luleå University of Technology, ISSN 1402-1757 ; 2005:22

Research subject: Energy Engineering

Identifiers: URN: urn:nbn:se:ltu:diva-18198Local ID: 76054550-9a36-11db-8975-000ea68e967bOAI: diva2:991205

Note: Godkänd; 2005; 20070102 (haneit)Available from: 2016-09-29 Created: 2016-09-29Bibliographically approved

Autor: Eriksson, Gunnar


Documentos relacionados