Effect of Laser Welding Parameters on Formation of NiTi Shape Memory Alloy WeldsReportar como inadecuado

Effect of Laser Welding Parameters on Formation of NiTi Shape Memory Alloy Welds - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

Advances in Materials Science and Engineering - Volume 2014 2014, Article ID 494851, 8 pages -

Research Article

College of Materials Science and Engineering, Jilin University, Changchun 130012, China

Aviation University of Air Force, Changchun 130022, China

Received 30 December 2013; Revised 11 March 2014; Accepted 13 March 2014; Published 3 April 2014

Academic Editor: Kean Aw

Copyright © 2014 Wei Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


In this work experimental trials of welding of NiTi flat plates with 2.0 mm thickness were conducted using a 4.5 kW continuous wave CW Nd:YAG laser. The influences of laser output power, welding speed, defocus amount and side-blow shielding gas flow rate on the morphology, welding depth and width, and quality of the welded seam were investigated. Meanwhile, the effects of heat input on the mechanical and functional properties of welded joints were studied. The results show that laser welding can take better formation in NiTi alloys. The matching curves with laser power and welding speed affecting different formation of welds were experimentally acquired, which can provide references for laser welding and engineering application of NiTi alloy. The heat input has obvious effects on the ultimate tensile strength UTS and shape memory behavior of the welded joints.

Autor: Wei Wang, Xiaohong Yang, Hongguang Li, Fuzhong Cong, and Yongbing Liu

Fuente: https://www.hindawi.com/


Documentos relacionados