Effect of the sand-blasting of edge peeling tools on the cutting forces and wear resistanceReportar como inadecuado




Effect of the sand-blasting of edge peeling tools on the cutting forces and wear resistance - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

1 LaBoMaP - Laboratoire Bourguignon des Matériaux et Procédés 2 Ionbond France SA

Abstract : One of the major problems concerning tools of wood industry is nicks occurrence on the cutting edge. This phenomenon is accentuated by the small tool angle of most of the wood machining tools. The aim of this present study is to look if the geometry modifications of the cutting edge permit to decrease the weakness of the tools, especially in peeling process. For this, different sand-blasted tools were tested in laboratory peeling of beech. In addition, the adhesion of CrAlN hard coating deposited on a modified cutting edge was also explored. The results obtained showed that the artificial wear by sand-blasting permits to increase the shocks resistance, coatings anchoring and changes the wear mechanism of the tools.

Keywords : CrAlN Sand-blasting peeling of beech steel cutting tools Wood machining





Autor: Chafik Labidi - Louis Denaud - Corinne Nouveau - Robert Collet - Laurent Henry -

Fuente: https://hal.archives-ouvertes.fr/



DESCARGAR PDF




Documentos relacionados