Influence of milling process on machined surface of porous polyurethane PU foamReport as inadecuate




Influence of milling process on machined surface of porous polyurethane PU foam - Download this document for free, or read online. Document in PDF available to download.

Technical gazette, Vol.23 No.4 August 2016. -

Nowadays polyurethane modelling foams are successfully replacing original materials in many applications due to certain comparative advantages also in copying artefacts. Milling is a fundamental machining operation frequently used in transforming products of PU foam. This experimental study focuses on surface roughness of milled PU foam. The influences of machining parameters on surface roughness in PU foam milling were assessed. Linear and area surface roughness evaluations after CNC milling are compared and estimated for the use in future research. Additionally the surface roughness values increase with a feed rate per tooth and decrease with an increase of spindle speed. The milling tests showed significant influence of modelling board density on the final surface roughness. Additional area surface roughness values have been evaluated.

milling; polyurethane modelling foam; surface roughness



Author: Rok Hafner - ; Faculty for Mechanical Engineering, Aškerčeva 6, 1000 Ljubljana, Slovenia Franci Pušavec - ; Faculty for Mechan

Source: http://hrcak.srce.hr/



DOWNLOAD PDF




Related documents