Prediction of viscous cracking and cyclic fatigue of salt polycrystals using a joint-enriched Finite Element ModelReport as inadecuate


Prediction of viscous cracking and cyclic fatigue of salt polycrystals using a joint-enriched Finite Element Model


Prediction of viscous cracking and cyclic fatigue of salt polycrystals using a joint-enriched Finite Element Model - Download this document for free, or read online. Document in PDF available to download.

We present a new Joint-enriched Finite Element Method JFEM to predict viscous damage and fatigue in halite polycrystals in 2D. Different visco-plastic finite elements are used to represent grains of different orientations, and joint elements are used for modeling crack propagation. Simulations of uniaxial creep tests show that, as it could be predicted theoretically, viscous shear deformation in grains causes geometric incompatibilities. Numerical results also show that the transition between secondary and tertiary creep corresponds to inter-granular crack coalescence. The JFEM model captures the mechanical behavior of halite under cyclic loading, mainly: a Higher stress amplitude, lower confining stress, and lower loading frequency increase deformation and damage; b The polycrystal’s Young’s modulus decreases exponentially with the number of cycles; c The behavior is similar for different loading directions. Simulations with intra- and inter- granular joint elements show that most stress concentrations occur in intra-granular joints where several angular grains are in contact. Results of creep tests obtained with the JFEM are compared to those obtained with an inclusion-matrix model that accounts for damage accommodation due to grain breakage. Both the JFEM and inclusion-matrix models are calibrated against experimental creep tests to: a Produce a Young’s modulus of 23 GPa for the polycrystal; b Match secondary creep strain rates; c Match the time of tertiary creep initiation. In the inclusion-matrix model, the absence of grain geometric rearrangement results in a brutal failure just after the first grain breakage that triggers tertiary creep. Moreover, the JFEM model highlights the development of crack patterns upon viscous deformation. The JFEM is of great promise to understand complex phenomena of viscous accommodation coupled with grain interface debonding.



School of Civil and Environmental Engineering Publications and Presentations -



Author: Zhu, Cheng - Pouya, Amade - Arson, Chloé - -

Source: https://smartech.gatech.edu/







Related documents