Reactivity control of a PWR 19x19 uranium silicide fuel assemblyReportar como inadecuado


Reactivity control of a PWR 19x19 uranium silicide fuel assembly


Reactivity control of a PWR 19x19 uranium silicide fuel assembly - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

The Integral Inherently Safe Light Water Reactor I2S-LWR is a novel reactor concept which aims to apply safety-promoting features typical of small modular reactors SMRs to a large pressurized water reactor PWR of 3000 MWt, thus providing an option for a passively safe reactor to markets which would find greater economic benefit in a large reactor. Pushing the compact core of an integral reactor to 3000 MWt necessitates several design innovations to remain within safety margins while meeting the goal of increased power density. The I2S-LWR fuel assembly takes on a 19x19 lattice with reduced fuel rod dimensions relative to traditional Westinghouse-type 17x17 PWR fuel assemblies. It is anticipated that the I2S-LWR will eventually employ uranium silicide U3Si2 fuel instead of uranium oxide UO2 to improve thermal performance. These unique design features are closely tied to the I2S-LWR core neutronics, thereby necessitating a thorough investigation of reactivity control options.This thesis considers the design of both control rods and burnable absorbers on the basis of the I2S-LWR uranium silicide fuel assembly. Fuel assembly designs are considered with various control rod arrangements and burnable absorber layouts with several candidate absorber materials and concentrations. Viable fuel assembly designs must meet targets for reactivity and power peaking while satisfying constraints on core safety and cycle length. Designs are developed in a heuristic manner, and key performance metrics are processed at each iteration. Characteristics of common optimization algorithms are mimicked at a high level so as to guide the progression of design iterations. The optimized fuel assembly designs produced in this way are recommended for use in core loading pattern design.



Georgia Tech Theses and Dissertations - School of Mechanical Engineering Theses and Dissertations -



Autor: Burns, Joseph R. - -

Fuente: https://smartech.gatech.edu/







Documentos relacionados