Sliding Wear Performance Evaluation of Red Mud RM, RM Fly Ash FA and RM FA Al Coatings on Mild SteelReportar como inadecuado




Sliding Wear Performance Evaluation of Red Mud RM, RM Fly Ash FA and RM FA Al Coatings on Mild Steel - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

The research paper focuses on evaluating the dry sliding wear behaviour of plasma sprayed coatings like red mud RM, RM + 5% Fly Ash FA and RM + 5% FA + 5% Al on mild steel cylindrical shape substrate. Spraying was done at 10 kW operating power level. A conventional pin on disc wear tester is adopted for wear analysis. The wear test was performed at track diameter of 50 mm and sliding speed of 60 rpm 0.157 m-s with normal load of 10 N. The duration of sliding varies from 54 minutes for pure red mud coating to a maximum value of 102 minutes for RM + 5% FA + 5% Al composite coating. A significant decrease in wear rate in terms of mass loss is observed by reinforcement of fly ash and aluminium to red mud, which might be due to improved interfacial properties.

KEYWORDS

Red Mud, Fly Ash, Aluminium, Plasma Coating, Sliding Wear, Frictional Force

Cite this paper

Sutar, H. , Roy, D. , Mishra, S. and Murmu, R. 2016 Sliding Wear Performance Evaluation of Red Mud RM, RM + Fly Ash FA and RM + FA + Al Coatings on Mild Steel. Materials Sciences and Applications, 7, 171-179. doi: 10.4236-msa.2016.73017.





Autor: Harekrushna Sutar1,2,3, Debashis Roy2, Subash Chandra Mishra3, Rabi Ranjan Murmu1

Fuente: http://www.scirp.org/



DESCARGAR PDF




Documentos relacionados