Benzene Sensing Using Thin Films of Titanium Dioxide Operating at Room TemperatureReportar como inadecuado

Benzene Sensing Using Thin Films of Titanium Dioxide Operating at Room Temperature - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.


School of Engineering and Centre for Molecular and Nanoscale Electronics, University of Durham, South Road, Durham DH1 3LE, UK


Present address: Faculty of Applied Sciences, University of the West of England, Frenchay, Bristol BS16 1QY, UK


Author to whom correspondence should be addressed.

Abstract Benzene is a carcinogen with a maximum permitted exposure limit in the atmosphere of 16.25μg m-3 5 ppb. There is a need for an inexpensive instrument for measuring benzene concentrations, particularly in urban areas. We have shown that thin films of titanium dioxide dispersed in polyvinylidenfluoride are sensitive to benzene at room temperature with possible applications in benzene monitors. In this paper, we present a detailed study into the direct current electrical characteristics of the films when exposed to benzene. The current I through the films increase linearly with applied voltage, V, at low applied voltages V ≲0.6V and at higher voltages, I α V5. The results are consistent with the films being p-type semiconductors and, at higher voltages, the conduction is dominated by a space charge limited process caused by negative traps with an average energy of 0.1 eV. The films are sensitive to benzene only at the higher voltages. The proposed mechanism is that benzene molecules on the surface of the films reduce the concentration of holes. The relative resistance of the films increases linearly r = 0.92 with benzene concentrations sensitivity of 0.042% ppm-1 and a detection limit of 10 ppm. The films have response times to increasing and decreasing concentrations of benzene of about 1 and 5 min respectively. View Full-Text

Keywords: TiO2 sensor; Benzene; SCLC; Polyvinylidenfluoride TiO2 sensor; Benzene; SCLC; Polyvinylidenfluoride

Autor: Mohammed Mabrook 1,* and Peter Hawkins 2



Documentos relacionados