Automatic Stem Mapping by Merging Several Terrestrial Laser Scans at the Feature and Decision LevelsReportar como inadecuado




Automatic Stem Mapping by Merging Several Terrestrial Laser Scans at the Feature and Decision Levels - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

Department of Remote Sensing and Photogrammetry, Finnish Geodetic Institute, FI-02431 Masala, Finland





*

Author to whom correspondence should be addressed.



Abstract Detailed up-to-date ground reference data have become increasingly important in quantitative forest inventories. Field reference data are conventionally collected at the sample plot level by means of manual measurements, which are both labor-intensive and time-consuming. In addition, the number of attributes collected from the tree stem is limited. More recently, terrestrial laser scanning TLS, using both single-scan and multi-scan techniques, has proven to be a promising solution for efficient stem mapping at the plot level. In the single-scan method, the laser scanner is placed at the center of the plot, creating only one scan, and all trees are mapped from the single-scan point cloud. Consequently, the occlusion of stems increases as the range of the scanner increases, depending on the forest’s attributes. In the conventional multi-scan method, several scans are made simultaneously inside and outside of the plot to collect point clouds representing all trees within the plot, and these scans are accurately co-registered by using artificial reference targets manually placed throughout the plot. The additional difficulty of applying the multi-scan method is due to the point-cloud registration of several scans not being fully automated yet. This paper proposes a multi-single-scan MSS method to map the sample plot. The method does not require artificial reference targets placed on the plot or point-level registration. The MSS method is based on the fully automated processing of each scan independently and on the merging of the stem positions automatically detected from multiple scans to accurately map the sample plot. The proposed MSS method was tested on five dense forest plots. The results show that the MSS method significantly improves the stem-detection accuracy compared with the single-scan approach and achieves a mapping accuracy similar to that achieved with the multi-scan method, without the need for the point-level registration. View Full-Text

Keywords: forestry; terrestrial laser scanning; LiDAR; point cloud; single-scan; multi-single-scan; multi-scan; registration forestry; terrestrial laser scanning; LiDAR; point cloud; single-scan; multi-single-scan; multi-scan; registration





Autor: Xinlian Liang * and Juha Hyyppä

Fuente: http://mdpi.com/



DESCARGAR PDF




Documentos relacionados