A Novel Controller Design for the Next Generation Space Electrostatic Accelerometer Based on Disturbance Observation and RejectionReportar como inadecuado


A Novel Controller Design for the Next Generation Space Electrostatic Accelerometer Based on Disturbance Observation and Rejection


A Novel Controller Design for the Next Generation Space Electrostatic Accelerometer Based on Disturbance Observation and Rejection - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

1

MOE Key Laboratory of Fundamental Quantities Measurement, School of Physics, Huazhong University of Science and Technology HUST, Wuhan 430074, China

2

School of Automation, Huazhong University of Science and Technology HUST, Wuhan 430074, China

3

Institute of Geodesy and Geophysics, Chinese Academy of Science, Wuhan 430077, China

4

Tianqin Research Center for Gravitational Physics, School of Physics and Astronomy, Sun Yat-sen University, Zhuhai 519082, China





*

Author to whom correspondence should be addressed.



Academic Editor: Vittorio M. N. Passaro

Abstract The state-of-the-art accelerometer technology has been widely applied in space missions. The performance of the next generation accelerometer in future geodesic satellites is pushed to 8 × 10 − 13 m - s 2 - H z 1 - 2 , which is close to the hardware fundamental limit. According to the instrument noise budget, the geodesic test mass must be kept in the center of the accelerometer within the bounds of 56 pm - Hz 1 - 2 by the feedback controller. The unprecedented control requirements and necessity for the integration of calibration functions calls for a new type of control scheme with more flexibility and robustness. A novel digital controller design for the next generation electrostatic accelerometers based on disturbance observation and rejection with the well-studied Embedded Model Control EMC methodology is presented. The parameters are optimized automatically using a non-smooth optimization toolbox and setting a weighted H-infinity norm as the target. The precise frequency performance requirement of the accelerometer is well met during the batch auto-tuning, and a series of controllers for multiple working modes is generated. Simulation results show that the novel controller could obtain not only better disturbance rejection performance than the traditional Proportional Integral Derivative PID controllers, but also new instrument functions, including: easier tuning procedure, separation of measurement and control bandwidth and smooth control parameter switching. View Full-Text

Keywords: electrostatic accelerometer; inertial sensor; embedded model control; non-smooth optimization electrostatic accelerometer; inertial sensor; embedded model control; non-smooth optimization





Autor: Hongyin Li 1,2, Yanzheng Bai 1, Ming Hu 3, Yingxin Luo 4 and Zebing Zhou 1,*

Fuente: http://mdpi.com/



DESCARGAR PDF




Documentos relacionados