Robust Functionalization of Large Microelectrode Arrays by Using Pulsed Potentiostatic DepositionReportar como inadecuado


Robust Functionalization of Large Microelectrode Arrays by Using Pulsed Potentiostatic Deposition


Robust Functionalization of Large Microelectrode Arrays by Using Pulsed Potentiostatic Deposition - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

1

ETH Zurich, Department of Biosystems Science and Engineering, Bio Engineering Laboratory, Mattenstrasse 26, CH-4058 Basel, Switzerland

2

Agricultural and Biological Engineering, Biomedical Engineering, Physiological Sensing Facility at the Bindley Bioscience Center and Birck Nanotechnology Center, Purdue University, West Lafayette, IN 47907, USA

3

Intramural Research Program of the National Institute on Drug Abuse, National Institutes of Health, Baltimore, MD 21224, USA





*

Author to whom correspondence should be addressed.



Academic Editors: Andrew J. Mason, Haitao Li and Yuning Yang

Abstract Surface modification of microelectrodes is a central step in the development of microsensors and microsensor arrays. Here, we present an electrodeposition scheme based on voltage pulses. Key features of this method are uniformity in the deposited electrode coatings, flexibility in the overall deposition area, i.e., the sizes and number of the electrodes to be coated, and precise control of the surface texture. Deposition and characterization of four different materials are demonstrated, including layers of high-surface-area platinum, gold, conducting polymer polyethylenedioxythiophene, also known as PEDOT, and the non-conducting polymer polyphenylenediamine, also known as PPD. The depositions were conducted using a fully integrated complementary metal-oxide-semiconductor CMOS chip with an array of 1024 microelectrodes. The pulsed potentiostatic deposition scheme is particularly suitable for functionalization of individual electrodes or electrode subsets of large integrated microelectrode arrays: the required deposition waveforms are readily available in an integrated system, the same deposition parameters can be used to functionalize the surface of either single electrodes or large arrays of thousands of electrodes, and the deposition method proved to be robust and reproducible for all materials tested. View Full-Text

Keywords: electrodeposition; microelectrode array; pulse potential waveform; voltage pulses; pulsed potentiostatic deposition; complementary metal-oxide-semiconductor CMOS; platinum; gold; polyphenylenediamine PPD; polyethylenedioxythiophene PEDOT electrodeposition; microelectrode array; pulse potential waveform; voltage pulses; pulsed potentiostatic deposition; complementary metal-oxide-semiconductor CMOS; platinum; gold; polyphenylenediamine PPD; polyethylenedioxythiophene PEDOT





Autor: Joerg Rothe 1,* , Olivier Frey 1, Rajtarun Madangopal 2,3, Jenna Rickus 2 and Andreas Hierlemann 1

Fuente: http://mdpi.com/



DESCARGAR PDF




Documentos relacionados