Slope Design and Implementation in Open Pit Mines: Geological and Geomechanical ApproachReportar como inadecuado




Slope Design and Implementation in Open Pit Mines: Geological and Geomechanical Approach - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

1 GEOSCIENCES - Centre de Géosciences

Abstract : Slopes in open pit mines must be considered as geotechnical structures. Therefore their design and implementation must be conducted with all consideration including technical, economical, environmental and safety issues. But these structures are above all natural geological and geomechanical features and the geological structures as well as the petrographical nature of the rock material control the deformation and failure mechanisms. It is therefore important to implement a well-defined methodology which should be conducted according to the following phases: 1 rock mass characterization derived from the acquisition and analysis of geological and geomechanical data; 2 determination of the potential mechanisms of deformation and failure, and their numerical modelling; 3 slope design and definition of reinforcement and monitoring methods. This paper presents various available techniques and tools to achieve these successive phases and illustrate their implementation and also limitations through case studies of slope design in open pit mines.

Keywords : slope stability slope design engineering geology fault open pit mines SOMAIR uranium mine OCP phosphate mine





Autor: Jean-Alain Fleurisson -

Fuente: https://hal.archives-ouvertes.fr/



DESCARGAR PDF




Documentos relacionados