Shape-optimization of 2D hydrofoils using an Isogeometric BEM solverReportar como inadecuado

Shape-optimization of 2D hydrofoils using an Isogeometric BEM solver - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

1 Nazarbayev University Kazakhstan 2 National Technical University of Athens 3 Technological Educational Institute TEI of Athens 4 University of Strathclyde 5 AROMATH - AlgebRe, geOmetrie, Modelisation et AlgoriTHmes CRISAM - Inria Sophia Antipolis - Méditerranée , UoA - University of Athens

Abstract : In this paper, an optimization procedure, based on an Isogeometric BEM solver for the potential flow, is developed and used for the shape optimization of hydrofoils. The formulation of the exterior potential-flow problem reduces to a Boundary-Integral Equation BIE for the associated velocity potential exploiting the null-pressure jump Kutta condition at the trailing edge. The numerical solution of the BIE is performed by an Isogeometric Boundary-Element Method BEM combining a generic B-splines parametric modeler for generating hydrofoil shapes, using a set of eight parameters, the very same basis of the geometric representation for representing the velocity potential and collocation at the Greville abscissas of the knot vector of the hydrofoil-s B-splines representation. Furthermore, the optimization environment is developed based on the geometric parametric modeler for the hydrofoil, the Isogeometric BEM solver and an optimizer employing a controlled elitist genetic algorithm. Multi-objective hydrofoil shape optimization examples are demonstrated with respect to the criteria i maximum lift coefficient and ii minimum deviation of the hydrofoil area from a reference area.

Keywords : Isogeometric Analysis NURBS Potential Flows Lifting Flows Shape optimization

Autor: K Kostas - A Ginnis - C Politis - P Kaklis -



Documentos relacionados