Seismic wave propagation in heterogeneous limestone samplesReportar como inadecuado




Seismic wave propagation in heterogeneous limestone samples - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

* Corresponding author 1 LFC-R - Laboratoire des Fluides Complexes et leurs Réservoirs 2 LMAP - Laboratoire de Mathématiques et de leurs Applications Pau 3 ISTerre - Institut des Sciences de la Terre

Abstract : Mimic near-surface seismic field measurements at a small scale, in the laboratory, under a well-controlled environment, may lead to a better understanding of wave propagation in complex media such as in geological materials. Laboratory experiments can help in particular to constrain and refine theoretical and numerical modelling of physical phenomena occurring during seismic propagation, in order to make a better use of the complete set of measurements recorded in the field. We have developed a laser Doppler vibrometer laser interferometry platform designed to measure non-contact seismic displacements or velocities of a surface. This technology enables to measure displacements as small as a tenth of a nanometer on a wide range of frequencies, from a few tenths to a few megahertz. Our experimental setup is particularly suited to provide high-density spatial and temporal records of displacements on the edge of any vibrating material aluminum, limestone,



We will firstly present experiments in cuboid and cylinders of aluminum homogeneous in order to calibrate the seismic sources radiation diagram, frequency content and identify the wave arrivals P, S, converted, surface waves. The measurements will be compared quantitatively to a direct 2D numerical elastodynamic simulation finite elements, Interior Penalty Discontinuous Galerkin. We will then show wave measurements performed in cylindrical heterogeneous limestone cores of typical diameter size around 10 cm. Tomographic images of velocity figure 2a in 2D slices of the limestone cores will be derived based upon the time of first arrivals and implemented in the numerical model. By quantifying the difference between numerical and experimental results, the tomographic velocity model will be reciprocally improved and finally compared to a X − ray tomographic image of that slice. A brief overview of the studies Seismic sources We will explore piezo-electric sources of different frequencies 100 kHZ ∼ 5 M Hz and test the new laser ablation source whose dominant frequency can reach 2 M Hz in aluminium. Avantages and drawbacks of each technology will be discussed in terms of source and wave propagation characterisation. Wave identification in an aluminium cube of side length 280 mm and seismic source at the center of one face We have identified experimentally P, S, head wave, PS, SP and surface waves measured on the cube surfaces. Meanwhile, direct numerical simulations have helped to quantitatively analyze the kinematics of wave fronts. For example, on the surface where the seismic source is excited, a P front, an S front and a PS head wave front are measured by the laser vibrometer right after the initial seismic impulse. These wavefronts can be understood by both the Huygens- Principle and the Snell-Descartes Law. In Figure 1, the seismic source excits simultaneously at time t = 0 a P wave and an S wave. As time evolves, waves propagate inside the volume and a P-wave propagates along the boundary as well: the latter one acts on the boundary as secondary sources which will emit both P and S waves, creating finally a new PS head wave front nicely measured in the experiments. The colours of magenta and green correspond to null amplitudes.

Keywords : Wave propagation laser ablation source piezo source numerical modelling limestone core





Autor: Chengyi Shen - Daniel Brito - Valier Poydenot - Julien Diaz - Stéphane Garambois - Clarisse Bordes -

Fuente: https://hal.archives-ouvertes.fr/



DESCARGAR PDF




Documentos relacionados