Dynamic Identification of Robots with a Dry Friction Model Depending on Load and VelocityReportar como inadecuado

Dynamic Identification of Robots with a Dry Friction Model Depending on Load and Velocity - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

1 IRCCyN - Institut de Recherche en Communications et en Cybernétique de Nantes 2 LIST - Laboratoire d-Intégration des Systèmes et des Technologies

Abstract : Usually, the joint transmission friction model for robots is composed of a viscous friction force and of a constant dry sliding friction force. However, according to the Coulomb law, the dry friction force depends linearly on the load driven by the transmission. It follows that this effect must be taken into account for robots working with large variation of the payload or inertial and gravity forces, and actuated with transmissions as speed reducer, screw-nut or worm gear. This paper proposes a new inverse dynamic identification model for n degrees of freedom dof serial robot, where the dry sliding friction force is a linear function of both the dynamic and the external forces, with a velocity-dependent coefficient. A new identification procedure groups all the joint data collected while the robot is tracking planned trajectories with different payloads to get a global least squares estimation of inertial and new friction parameters. An experimental validation is carried out with a joint of an industrial robot.

Keywords : Robot Modeling Identification Friction

Autor: Pauline Hamon - Maxime Gautier - Philippe Garrec -

Fuente: https://hal.archives-ouvertes.fr/


Documentos relacionados