Rock-Arch Instability Characteristics of the Sandstone Plate under Different Loading ConditionsReport as inadecuate

Rock-Arch Instability Characteristics of the Sandstone Plate under Different Loading Conditions - Download this document for free, or read online. Document in PDF available to download.

Advances in Materials Science and Engineering - Volume 2014 2014, Article ID 950870, 9 pages -

Research Article

School of Civil Engineering and Mechanics, Yanshan University, Qinhuangdao 066004, China

Opening Laboratory for Deep Mine Construction, Henan Polytechnic University, Jiaozuo 454003, China

School of Mining Engineering, University of New South Wales, Sydney, NSW 2052, Australia

Civil and Environmental Engineering Institute, University of Science and Technology, Beijing 100083, China

Received 23 February 2014; Accepted 21 April 2014; Published 19 May 2014

Academic Editor: Juan José del Coz Díaz

Copyright © 2014 Shuren Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


Under the concentrated loading and the uniform loading, the tests on the brittle fracture and the hinged arching until the rock-arch instability of the sandstone plate were conducted using self-developed loading device, and the sensitivity of influent factors on the rock-arch failure was analyzed by numerical test based on the particle flow code PFC. The results showed that sandstone plate instability presented four phases: small deformation elastic stage, brittle fracture arching stage, rock-arch bearing stage, and rock-arch instability stage. Under the uniform loading, the maximum vertical force of the rock-arch instability was much higher than that under the concentrated loading condition, but the maximum lateral force was almost the same. The number of acoustic emission AE and its positioning results of the sandstone plate showed that the extent of the plate damage under the uniform loading was higher than that under the concentrated loading condition. The friction coefficient effect, size effect, loading rate effect, and the initial horizontal force effect on the rock-arch instability were analyzed by the PFC

numerical experiment.

Author: Shuren Wang, Paul Hagan, Baowen Hu, Kanchana Gamage, Cheng Yan, and Dianfu Xu



Related documents