Electrically Conductive Membranes Obtained by Simultaneous Electrospinning and Electrospraying ProcessesReportar como inadecuado




Electrically Conductive Membranes Obtained by Simultaneous Electrospinning and Electrospraying Processes - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

Journal of Nanomaterials - Volume 2016 2016, Article ID 8362535, 11 pages -

Research ArticleDepartment of Industrial Engineering, University of Padova, Via Marzolo 9, Padova, Italy

Received 9 May 2016; Accepted 30 October 2016

Academic Editor: Miguel A. Correa-Duarte

Copyright © 2016 Martina Roso et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Electrically conductive polyurethane nanostructured membranes have been prepared combining the electrospinning of polymer nanofibers NFs with the electrospraying of pristine multiwall carbon nanotubes MWCNTs in simultaneous processes. In order to have a better understanding of the distribution of MWCNTs on the surface of the membranes, the optimization of the electrospraying process has been carried out and the distribution of MWCNTs has been evaluated using image texture analysis techniques. Large membranes with a volume resistivity typical of electrostatic discharge materials with a MWCNTs concentration less than 0.3% wt 0.01 mg-cm

have been obtained and characterized with morphological SEM and TEM and spectroscopic UV-Vis, Raman techniques.





Autor: Martina Roso, Alessandra Lorenzetti, Carlo Boaretti, and Michele Modesti

Fuente: https://www.hindawi.com/



DESCARGAR PDF




Documentos relacionados