Experimental and Numerical Investigations on Deformation of Cylindrical Shell Panels to Underwater ExplosionReportar como inadecuado




Experimental and Numerical Investigations on Deformation of Cylindrical Shell Panels to Underwater Explosion - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

Shock and Vibration - Volume 8 2001, Issue 5, Pages 253-270



Shock and Vibration Center, Naval Science and Technological Laboratory, Visakhapatnam 530027, India

Ocean Engineering Department, Indian Institute of Technology Madras, Chennai, 600036, India

Received 5 May 2000; Revised 24 April 2001

Copyright © 2001 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Experimental and numerical investigations on cylindrical shell panels subjected to underwater explosion loading are presented. Experiments were conducted on panels of size 0.8 × 0.6 × 0.00314 m and shell rise-to-span ratios h-l = 0.0, 0.05, 0.1 , using a box model set-up under air backed conditions in a shock tank. Small charges of PEK I explosive were employed. The plastic deformation of the panels was measured for three loading conditions. Finite element analysis was carried out using the CSA-GENSA [DYNA3D] software to predict the plastic deformation for various loading conditions. The analysis included material and geometric non-linearities, with strain rate effects incorporated based on the Cowper-Symonds relation. The numerical results for plastic deformation are compared with those from experiments.





Autor: K. Ramajeyathilagam, C.P. Vendhan, and V. Bhujanga Rao

Fuente: https://www.hindawi.com/



DESCARGAR PDF




Documentos relacionados