Experimental Finite Element Approach for Stress AnalysisReportar como inadecuado

Experimental Finite Element Approach for Stress Analysis - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

Journal of Engineering - Volume 2014 2014, Article ID 643051, 7 pages -

Research ArticleMechanical Engineering Department, University of Gaziantep, 27310 Gaziantep, Turkey

Received 25 December 2013; Accepted 22 April 2014; Published 11 May 2014

Academic Editor: Jong M. Park

Copyright © 2014 Ahmet Erklig and M. Akif Kütük. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


This study aims to determining the strain gauge location points in the problems of stress concentration, and it includes both experimental and numerical results. Strain gauges were proposed to be positioned to corresponding locations on beam and blocks to related node of elements of finite element models. Linear and nonlinear cases were studied. Cantilever beam problem was selected as the linear case to approve the approach and conforming contact problem was selected as the nonlinear case. An identical mesh structure was prepared for the finite element and the experimental models. The finite element analysis was carried out with ANSYS. It was shown that the results of the experimental and the numerical studies were in good agreement.

Autor: Ahmet Erklig and M. Akif Kütük

Fuente: https://www.hindawi.com/


Documentos relacionados