Evaluation of Fillers Dispersion Degree in Elastomeric Magnetic CompositesReportar como inadecuado

Evaluation of Fillers Dispersion Degree in Elastomeric Magnetic Composites - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

Smart Materials ResearchVolume 2012 2012, Article ID 532170, 8 pages

Research Article

Department of Plastics and Rubber, Institute of Polymer Materials, Faculty of Chemical and Food Technology, Slovak University of Technology, Radlinského 9, 812 37 Bratislava, Slovakia

Center of Engineering Sciences, Martin Luther University, Halle-Wittenberg, D06099 Halle, Germany

Department of Electromagnetic Theory, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology, Il-kovičova 3, 812 19 Bratislava, Slovakia

Received 8 November 2011; Accepted 19 April 2012

Academic Editor: Sontipee Aimmanee

Copyright © 2012 Ján Kruželák et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


Elastomeric magnetic composites were prepared by incorporation of strontium ferrite into polymer matrices based on natural as well as butadiene rubber. Besides the rubber and ferrite, or the combinations of ferrite and carbon black in case of natural rubber, the model rubber compounds contained only ingredients which support curing process. The study was dedicated to the observation of fillers dispersion degree in the rubber matrices and investigation of physical-mechanical and magnetic properties of prepared composites. The results indicate that the dispersion degree of ferrite in the rubber matrices is not very high, but it can be positively influenced by the addition of carbon black. Despite of the fact that ferrite exhibits only low reinforcing effect on cross-linked elastomeric materials, physical-mechanical properties can be also positively influenced by the mutual change in combinations of both fillers ferrite and carbon black. The prepared materials seem to have suitable magnetic and elastic properties.

Autor: Ján Kruželák, Sybill Ilisch, Ivan Hudec, and Rastislav Dosoudil

Fuente: https://www.hindawi.com/


Documentos relacionados