Development of Glass-Jute Fibers Reinforced Polyester CompositeReportar como inadecuado

Development of Glass-Jute Fibers Reinforced Polyester Composite - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

Indian Journal of Materials ScienceVolume 2013 2013, Article ID 675264, 6 pages

Research Article

Department of Mechanical Engineering, Maharishi Markandeshwar University, Mullana, Ambala 133203, India

Department of Mechanical Engineering, Thapar University, Patiala 147004, India

Received 13 August 2013; Accepted 18 September 2013

Academic Editors: A. Kajbafvala and R. Uppaluri

Copyright © 2013 Amit Bindal et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


Composites play significant role as engineering material and their use has been increasing day by day due to their specific properties such as high strength to weight ratios, high modulus to weight ratio, corrosion resistance, and wear resistance. In present work, an attempt is made to hybridize the material using synthetic glass as well as natural fibres chemically treated jute, such that to reduce the overall use of synthetic reinforcement, to reduce the overall cost, and to enhance the mechanical properties. All composite specimens with different weight percentages of fibres were manufactured using hand lay-up process and testing was done by using ASTM standards. Experimental results revealed that hybridization of composite with natural and synthetic fibres shows enhanced tensile strength, flexural strength, and impact strength. The content of natural reinforcement was found to be in the range of 25–33.3% for best results. The effect of treated jute on flexural properties was more than that on tensile properties, which was due to greater stiffness of jute fibers. Chemical treatment of jute fibers lowers the water absorption and results were comparable to glass fiber reinforced polyester composites. The addition of jute also reduced the overall cost by 22.18%.

Autor: Amit Bindal, Satnam Singh, N. K. Batra, and Rajesh Khanna



Documentos relacionados