An Analytical Model for Predicting the Stress Distributions within Single-Lap Adhesively Bonded BeamsReport as inadecuate




An Analytical Model for Predicting the Stress Distributions within Single-Lap Adhesively Bonded Beams - Download this document for free, or read online. Document in PDF available to download.

Advances in Materials Science and Engineering - Volume 2014 2014, Article ID 346379, 5 pages -

Research ArticleInnovative Manufacturing Research Centre, Kunming University of Science and Technology, Kunming 650500, China

Received 13 November 2013; Accepted 23 December 2013; Published 11 February 2014

Academic Editor: Filippo Berto

Copyright © 2014 Xiaocong He and Yuqi Wang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

An analytical model for predicting the stress distributions within single-lap adhesively bonded beams under tension is presented in this paper. By combining the governing equations of each adherend with the joint kinematics, the overall system of governing equations can be obtained. Both the adherends and the adhesive are assumed to be under plane strain condition. With suitable boundary conditions, the stress distribution of the adhesive in the longitudinal direction is determined.





Author: Xiaocong He and Yuqi Wang

Source: https://www.hindawi.com/



DOWNLOAD PDF




Related documents