Selecting ground-motion models developed for induced seismicity in geothermal areasReportar como inadecuado

Selecting ground-motion models developed for induced seismicity in geothermal areas - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

1 Institute of Geophysics 2 BRGM - Bureau de Recherches Géologiques et Minières

Abstract : We present a case study of the ranking and weighting of ground-motion prediction equations GMPE for seismic hazard assessment of Enhanced Geothermal Systems EGSs. The study region is Cooper Basin Australia, where a hot-fractured-rock project was established in 2002. We test the applicability of 36 GMPEs based on stochastic simulations previously proposed for use at EGSs. Each GMPE has a set of corresponding model parameters describing stress drop, regional and local near-surface attenuation. To select suitable GMPEs for Cooper Basin from the full set we applied two methods. In the first, seismograms recorded on the local monitoring network were spectrally analysed to determine characteristic stress and attenuation parameters. In a second approach, residual analysis using the log likelihood LLH method was used to directly compare recorded and predicted short-period response spectral accelerations. The resulting ranking was consistent with the models selected based on spectral analysis, with the advantage that a transparent weighting approach was available using the LLH method. Region-specific estimates of variability were computed, with significantly lower values observed compared to previous studies of small earthquakes. This was consistent with the limited range of stress-drops and attenuation observed from the spectral analysis.

Keywords : geothermal power induced seismicity ground-motion prediction seismic hazard spectral analysis

Autor: Benjamin Edwards - John Douglas -



Documentos relacionados