Partly Duffing Oscillator Stochastic Resonance Method and Its Application on Mechanical Fault DiagnosisReport as inadecuate




Partly Duffing Oscillator Stochastic Resonance Method and Its Application on Mechanical Fault Diagnosis - Download this document for free, or read online. Document in PDF available to download.

Shock and Vibration - Volume 2016 2016, Article ID 3109385, 14 pages -

Research Article

State Key Laboratory Base of Eco-Hydraulic Engineering in Arid Area, Xi’an University of Technology, Xi’an 710048, China

Institute of Water Resources and Hydro-Electric Engineering, Xi’an University of Technology, Xi’an 710048, China

Institute of Water Resources and Hydropower Research, Northwest AandF University, Yangling 712100, China

Received 4 July 2016; Revised 12 September 2016; Accepted 24 October 2016

Academic Editor: Pedro Galvín

Copyright © 2016 Jian Dang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Due to the fact that the slight fault signals in early failure of mechanical system are usually submerged in heavy background noise, it is unfeasible to extract the weak fault feature via the traditional vibration analysis. Stochastic resonance SR, as a method of utilizing noise to amplify weak signals in nonlinear dynamical systems, can detect weak signals overwhelmed in the noise. However, based on the analysis of the impact of noise intensity on SR effect, it is concluded that the detection results are dramatically limited by the noise intensity of measured signals, especially for incipient fault feature of mechanical system with poor working environment. Therefore, this paper proposes a partly Duffing oscillator SR method to extract the fault feature of mechanical system. In this method, to locate the appearance of weak fault feature and decrease noise intensity, the permutation entropy index is constructed to select the measured signals for the input of Duffing oscillator system. Then, according to the regulation of system parameters, a reasonable match between the selected signals and Duffing oscillator model is achieved to produce a SR phenomenon and realize the fault diagnosis of mechanical system. Experiment results demonstrate that the proposed method achieves a better effect on the fault diagnosis of mechanical system.





Author: Jian Dang, Rong Jia, Xingqi Luo, Hua Wu, and Diyi Chen

Source: https://www.hindawi.com/



DOWNLOAD PDF




Related documents