Experimental and numerical analysis of effect of cooling rate on thermal–microstructural response of spheroidal graphite cast iron solidificationReportar como inadecuado




Experimental and numerical analysis of effect of cooling rate on thermal–microstructural response of spheroidal graphite cast iron solidification - Descarga este documento en PDF. Documentación en PDF para descargar gratis. Disponible también para leer online.

1 Universidad de Santiago de Chile - USACH CHILE 2 Pontificia Universidad Católica de Chile 3 CIRIMAT - Centre interuniversitaire de recherche et d-ingenierie des matériaux 4 UTN - Universidad Tecnológica Nacional Sarmiento

Abstract : This work presents an experimental and numerical study of the solidification process of an eutectic spheroidal graphite cast iron SGI. The effect of the cooling rate on the thermal–microstructural response is particularly analysed. To this end, experiments as well as numerical simulations were carried out. The experiments consisted in a solidification test in a wedge-like casting such that different cooling rates were measured at specific positions along the part. A metallographic analysis was also performed in five locations of the sample with the aim of obtaining the number and size of graphite nodules at the end of the process. The numerical simulations were made using multinodular based and uninodular based models. These two models predicted similar results in terms of cooling curves and nodule counts. Besides, good experimental–numerical agreements were obtained for both the cooling curves and the graphite nodule counts.

Keywords : Spheroidal graphite cast iron Solidification Microstructure Numerical simulation Cooling rate Finite elements





Autor: A. Escobar - D. Celentano - Marcela Cruchaga - Jacques Lacaze - Bernd Schulz - P. Dardati - Antonio Parada -

Fuente: https://hal.archives-ouvertes.fr/



DESCARGAR PDF




Documentos relacionados